Latest News:

Welcome back to the Regional Fleet - Hawk Attew & Family 

On November 28th, the 13th boat of 2020 changed hands (11th in the Pacific Northwest Region): Jenn Potter and Gordon Tulip of Royal Victoria Yacht Club sold Dark Horse, #157, to Hawk Attew, 14, and family, who will sail it out of Cowichan Bay - exploring the nearby islands with the family and racing.

Hawk worked long hours over the past two summers with tremendous energy and focus with the goal of saving enough to buy his first 242.  He plans to build on the sailing skills he developed while learning to sail in Lake Ontario as a pre-teen. Hawk’s dad, Jason, previously raced on a 242 back in the late 90’s and looks forward to his son gaining the same experience he did. They plan on racing Dark Horse in next year's NA's at Nanaimo. This is excellent news, as it continues a recent string of inactive or semi-active boats getting sold or chartered to keen new owners.

With a dark blue hull, Dark Horse has an excellent NA's race record, coming 3rd overall in 2019, 2nd overall in 2007, and 3rd overall in 1993. The boat was listed for CDN$8,000 and was previously refurbished by Jason Rhodes and Matt Kirk-Buss in 2007 to an NA’s race-ready standard, with epoxy barrier coat and bottom paint.

It came with:

3 mains: Regatta (Sobstad - 2017, Club Racing Sobstad - 2009, Cruising - 2007)
3 jibs: most recent is a 2015
3 spinnakers: most recent was a crispy 2015
a completed Measurement Certificate
It did not come with a trailer or yard dolly.

Welcome to the Regional Fleet, Hawk and enjoy your first 242! (The photo below shows Hawk standing beside Dark Horse on the 28th.)

Hawk Attew Dark Horse Sold
M242 Deck Padding

The Pacific Northwest Regional Measurers (Ken Holland, Chris White, Ken Machtley, Jeremy Smith, Anthony Collett, Allan Strain, Tim Murphy, Jim Hyslop, Frank Rogers, and Michael Clements) proposed to allow M242 owners to experiment with deck padding in 2021 onwards with these goals in mind:
  • To make the M242 more comfortable to race by eliminating the deck rail “bump” issue
  • To attract new owners and crew who will like the increased comfort.
During 2020 an experiment was done on one Vancouver boat in a wide range of wind conditions across ~30 races to collect data on how one such padding setup could be constructed and used, and the results were excellent. It’s a game-changer re: crew comfort.

Other owners may come up with even more innovative solutions that are simpler, possibly cheaper, and more or equally effective: let the experimentation begin.

On November 25, the IMCA Technical Committee met via Zoom and agreed that:
  1. The deck padding concept had merit
  2. It did not affect the boat structurally
  3. It did not enhance performance
  4. It did provide a higher degree of comfort for skipper and crew
  5. It was inexpensive
  6. Other solutions may be developed. For example, Mike George (MG Marine) suggested that he would contact someone in his area and see about a foam solution. Another idea proposed by Ken Machtley prior to the meeting was to use button snaps for snapping cushions onto the cockpit seating: one monolithic custom molded cushion on each side with 4-6 snaps for attachment.
  7. The Technical Committee will allow all owners & crew to conduct unrestricted experiments with deck padding in 2021 in order to develop the best solution(s) for the greater good (400-500+ minds on the issue are better than just a few)
  8. The IMCA Technical Committee will revisit this topic at the end of 2021 and determine if some Class Standards can be developed with regard to color and design
  9. If more time is required by the Technical Committee to evaluate the solution set(s) then it may decide to roll the decision process into 2022.
The test boat used the following materials to construct the padding that is seen in a document (with many photos and a step-by-step installation guide) posted on the Fleet 1 & 2 website in the M242 Class Docs section: www.m242fleetone.org
  • $85 for 12 Interlock foam mats (they come in packs of 4 at Home Depot, Model # is 20009, SKU is 100811661)
  • $10 for 5 feet of ¾’ width double-sided sticky Velcro (available on Amazon)
  • Some duct tape
  • $18 for a can of 3M Super 77 spray-on glue
  • 2 long screws and washers
All of these items are available at Home Depot stores or Amazon. Total materials cost was about CDN$125.00
M242_Deck_Padding_1                           M242_Deck_Padding_2

Thanks to Daniele Vitali

I'M MISSING SAILING!